首页>ITES >最新资讯

What will CHOTEST Display at ITES 2020?

2020/01/06 09:00   |    阅读量:1221   |    来自: ITES Official

【导语】 CHOTEST is not only a software company but also a national high-tech enterprise integrating R&D, production, and sales, specializing in designing and producing precision measurement instruments and calibration instruments.

Booth No.: 3-A25

CHOTEST is not only a software company but also a national high-tech enterprise integrating research, development, production, and sales, specializing in designing and producing precision measurement instruments and calibration instruments.

With professional technology accumulation for more than a decade, the company has designed and manufactured VX3000 series Flash Measuring Machine, Super View series of White Light Interferometer measurement system, GT series of Laser Tracker, SJ5100 series of Universal Length Measuring Machines, SJ6000 Laser Interferometer Measurement System, SJ5700 series Profile Measuring Machine, SJ5200 series of Universal Thread Measuring Machines, SJ2000 series of Dial Indicator Testing Machines and other high-end measuring machines and equipment. The company provides professional measurement solutions for the domains from Nano-scale form and surface to large-scale precision measurement.

 Featured Exhibits

1. VX3000 series Flash Measuring Machine

20200106093703537_1C66A3B2C660DC8F7304F55A6840F31D.png

2. SJ6000 Laser Interferometer Measurement System

SJ6000 laser interferometer measures various parameters accurately by using high-frequency Helium-Neon laser generator imported from USA, thermal frequency stabilization technology of laser dual-longitudinal mode, high-precision environmental compensation modules, high-precision laser interference signal processing system, high-performance computer control system, geometric parameters interference optical path design. It can output long-term stable and high-precision(0.05ppm) laser quickly(about 6 minutes) which is with strong anti-interference ability by the laser thermal frequency stabilization control technology. With the cooperation of different prism modules, it can measure linearity, angle, straightness, Flatness, and perpendicularity, in addition, it can analyze dynamic characteristics.

20200106093809669_4EDEAAC7B017CBDD9B569A39ACD99667.png

3. SJ5700 series Profile Measuring Machine

Features:

a. high precision, high stability, high repeatability: fully meet the measurement requirements of test object.

1) The world's leading high-precision linear encoder system and high-precision inductance measurement system;

2) High-precision grinding rail is made of good material with high wear resistance.

3) High-performance linear motor driving system

b. Intelligent measurement software

Easy to use thanks to friendly software interface; the operator can grasp the basic operation of the machine.

c. Can measure multiple parameters

d. Measuring force

Measuring force controlled by voice coil motor driving system is continuously adjustable from 10mN to 150mN, and the resolution of measuring force is 0.2mN;

e. Intelligent protection system

Once the measuring probe collides with test object / workholder, or tensile force on measuring probe is too large during scanning process, the machine will stop scanning in order to protect measuring probe and measuring system.

f. Flexible manual control

The machine is equipped with an operating lever, which can be used to position the probe before measurement. The operator can control the measuring probe to move up and down, left and right quickly without the computer.

20200106094057689_86DB5262F817E3AF7BB340B5F1281F1D.png



版权声明:本文内容为ITES深圳工业展官方原创,转载请注明出处及本文链接,否则我司保留依法追究侵权的权利。如有疑问,请联系:jiangwanting@simmtime.com

相关阅读

1分钟获取参观证

正在提交数据...

手机号/邮箱登录

手机号/邮箱

密码

验证码

忘记密码?

登录

还没有账号,立即注册

您还没有认证手机,请认证

手机号

验证码

短信验证码

发送验证码到手机

为保证您的账户安全及提供展会相关服务,我们需要对您的手机进行认证。

查看《隐私保护政策》

认 证

您已成为深圳机械展专业观众,请设置您的登录密码

密码:

确认密码:

提 交

    展会资讯邮件订阅

  • 行业热点,展会新闻,新鲜奉上!
  • 提交
微信公众号

微信公众号

关闭